BONOSS Forged Active Cooling Hubcentric Wheel Spacers.

• Size: PCD5x120 CB64.1
• AL6061-T6
• Honda Civic Type R FK2/ FK8/ FL5

Features:

• Global Pioneer Active Cooling Technique
• Forged AL6061-T6 with Tensile Strength ≥310 Mpa, Safer
• ISO Grade 10 Nuts with BONOSS Engraved, Strength ≥ 1110 Mpa, Safer
• ISO Grade 12.9 Studs with BONOSS Engraved, Strength ≥ 1220 Mpa, Safer

Description:

Hub centric wheel spacers offer a better system of support and stability. BONOSS uses the multi-stage hub centric design, which means that multi-stage hub-centric can make the spacers more closely fitted to the wheel hub, greatly reduce the vibration of high-speed caused by the inaccurate hub centric. 

"Active cooling” single function of the wheel spacers is applied through the rotation of the wheel spacers, the external cold airflow takes away the internal heat through the active cooling grooves, to achieve the purpose of active cooling, improve the braking efficiency and reduce the risk of driving safety.

The knurling design helps to enhance heat dissipation by increasing more contact with the passing air, and the disassembly side grooves allows for easier removal if needed.

Fitting Note:

The hub must be cleaned with wire brush or mamre paper to ensure the best fitment. Please check that the BACK face of your wheel has pocket cut outs and that they are atleast 10mm deep, without these the spacers will not fit correctly.

*There are no refunds or returns if you make the incorrect decision or change your mind.